2
VICTORY 2 LEG ELECTRIC TABLE BASE
PARTS AND TOOLS
PLEASE REVIEW
these instructions before beginning the assembly procedures. Check that all the parts shown
below were provided with your order. Contact your supplier if any materials are missing. Do not discard the
packaging until satisfied that the product operates to your satisfaction.
PARTS PROVIDED
Cross Channels (2)
Legs with Motor (2)
Digital Keypad (1)
Control Unit (1)
Power Cable (1)
Motor Cables (2)
Top Supports (2)
CAUTION:
Hand-tighten screws only. Do
not
use
power tools.
Cable Clamps and Ties
Fasteners
Feet (2)
Foot Plates (2)
M6x35 (8)
M8x12 (12)
(6)
(3)
(6)
ST 4.8x19 (19)
ST 2.9x19 (2)
ADDITIONAL TOOLS REQUIRED
• 5mm Allen key
• Phillips screwdriver
CAUTION:
Always check that screws
used to attach components to the
work surface are not too long for the
thickness of the surface.
Work
Surface
