background image

All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of 
ESERA GmbH. Errors and technical modification subject to change. 



ESERA GmbH, ESERA-Automation 2020 

www.esera.de 

11337 V2.0 R1.0  Manual 

Page 10 of 10 

 

Commissioning may only be realized if the circuit is built into a contact proof housing. 

 

If measurements with an open housing are unavoidable, for safety reasons an isolating transformer must be 
installed upstream or a suitable power supply can be used.  

 

After installing the required tests according to DGUV / regulation 3 (German statutory accident insurance, 

https://en.wikipedia.org/wiki/German_Statutory_Accident_Insurance

) must be carried  

 

21 

Warranty 

ESERA GmbH guarantees that the goods sold at the time of transfer of risk to be free from material and workmanship 
defects and have the contractually assured characteristics. The statutory warranty period of two years begins from date 
of invoice. The warranty does not extend to the normal operational wear and normal wear and tear. Customer claims 
for damages, for example, for non-performance, fault in contracting, breach of secondary contractual obligations, 
consequential damages, damages resulting from unauthorized usage and other legal grounds are excluded. Excepting 
to this, ESERA GmbH accepts liability for the absence of a guaranteed quality resulting from intent or gross negligence. 
Claims made under the Product Liability Act are not affected. 
If defects occur for which the ESERA GmbH is responsible, and in the case of replacement goods, the replacement is 
faulty, the buyer has the right to have the original purchase price refunded or a reduction of the purchase price.  
ESERA GmbH accepts liability neither for the constant and uninterrupted availability of the ESERA GmbH or for 
technical or electronic errors in the online offer. 
We develop our products further and we reserve the right to make changes and improvements to any of the products 
described in this documentation without prior notice. If you need documentation or information about older product 
versions, contact us by email a

[email protected]

 

 

22 

Trademarks 

All mentioned designations, logos, names and trademarks (including those which are not explicitly marked) are 
trademarks, registered trademarks or other copyright or trademarks or titles or legally protected designations of their 
respective owners and are hereby expressly recognized as such by us. The mention of these designations, logos, 
names and trademarks is made for identification purposes only and does not represent a claim of any kind on the part 
of ESERA GmbH on these designations, logos, names and trademarks. Moreover, from their appearance on 
ESERA GmbH webpages it cannot be concluded that designations, logos, names and trademarks are free of 
commercial property rights. 

ESERA and Auto-E-Connect are registered trademarks of ESERA GmbH. 

 

23 

Contact 

ESERA GmbH  
Adelindastrasse 20 
87600 Kaufbeuren 
GERMANY 
Tel.: +49 8341 999 80-0

 

Fax: +49 8341 999 80-10

 

www.esera.de

 

[email protected]

 

WEEE-Number: DE30249510

 

 

 
 

Summary of Contents for 1-Wire Gateway 20 Modbus TCP











Reviews: