ESM32 Expansion Module
www.escene.cn/en
ESCENE COMMUNICATION
3
）
The remote extension number set by buttom number and the binding of accounts should be
under the same SIP server platform
；
4
）
On the Web: "Phone Settings"> "Features"> "Other features setting", please make sure
"BLF on or off."
to choose
"on"
, like
：
。 （
More specific web
setting, refer to next section
）
6. Web Setting
It could make ESM32 configuration and statusmore simple and convenient via web setting.
When setting on WEB page, please make sure the following points:
1
）
Connect Expansion Module ESM32 to IP Phone, then connect IP Phone and computer to the
same network. If there is no networking equipment, the computer could be directly connected
to the PC interface of IP Phone by Straight-line.
；
2
）
Ensure IP Phone is working, view the IP address of IP phone
；
3
）
Enter IP phone address in address bar of browser
；
4
）
Enter the administrator user name and password to enter the web configuration page, the
default administrator user name is root, the default password is root;
The system after landing as figure
：
5
）
Click on the left navigation bar ( "programmable keys"> "expansion module") to open the
settings page of Expansion Module.
Expansion Module provides users with the flexible Extension, like speed-dial, hot keys and
function keys and so on. More connecting method refer to Chapter2. Connecting Expansion
module ESM32.
After connecting Expansion Module, it can be installed and set by IP phone keyboard.
After installing, Expansion Module could be configured separately after installing, and
configured a variety of speed-dial and speed function code for users' scenarios
：
