6
LCD Display
1. Unit display
2. Pressure display
3. Function select display
4. Working indicator
Function and Operation
This device includes the OPS
(Over Pressure Setting) function used to
inflate and seat t
i
res on the rim.
Operation
1. Unit select
The device has four different scales that
can be chosen by the user which is
kpa /psi /bar /kgf.
Setting the unit here will be the default
unit for all future inflation, until changed.
1.1. Press (SET), (SET) will be shown
on the LCD screen, and the unit
will be flashing.
1.2. Press (+) or (-) to choose the unit.
1.3. Press (SET) to confirm.
O
.
O
.
O
.
0
KPA BAR PSI KGF
SET
OPS
1
2
4
3
2. Set OPS (Over Pressure Setting)
2.1. Press (SET) twice, (SET) and (OPS)
will be shown on the LCD screen,
(OPS) will be flashing.
2.2. Press (+) or (-) to choose the
OPS value.
2.3. Press (SET) to confirm. If
OPS value is not zero, (OPS) will
be displayed on the LCD screen.
3. Manual inflation
If t
i
re pressure is lower than 3 psi or 0.2
bar, the device will not start automatically.
3.1. Press (SET) three times, the
current pressure will be shown
on the LCD screen.
3.2 Press (+) to start manually.
4. Set programmable buttons
(P1) initial value is 15 psi /1 bar, (P2)
initial value is 30 psi /2.1 bar. The preset
pressure value can be reset by the user,
setting it here will save it for following
usage. But it reverts to the initial value
after a unit set change.
1. Press (P1) or (P2), (P1) preset value or
(P2) preset value will be shown on the
LCD screen.
2. Press (+) or (-) to choose preset
pressure value.
3. Press (SET) to confirm.