Escient Vision VX-600 Installation Guide
Version: M51003-06A1
5
Warnings and Precautions
•
Do not use this apparatus near water.
•
Clean only with a dry cloth.
•
Do not block any ventilation opeings.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
•
To reduce the risk of electric shock, do not remove the cover. No user service
-
able parts are inside. Refer servicing to qualified service personnel.
•
To prevent electric shock, do not use a 3 wire to 2 wire adapter plug.
•
A three prong grounded outlet is required.
•
You are cautioned that any change or modification not expressly approved in
this manual or approved in writing by an authorized representative of Escient
could void your warranty and/or your authority to operate this equipment.
•
Never remove drives while the power is on
• Never power on the unit with less than 4 drives properly installed
VX Contents
•
Power Cable
•
Ethernet Cable
•
This Installation Guide
What You Need to Setup the Vision VX Server
•
One or more Vision Series VS or VC clients
•
A Gigabit Ethernet switch (not a hub). The switch must be connected to a
network router with broadband Internet access (DSL, Cable, LAN, FIOS)
•
UPS - Uninterruptable Power Supply (optional)
Note:
The VX Series products must be installed with at least one Vision VS
Series or VC Series product to be able to browse and playback music, movies,
videos, and photos which are stored on the VX server.
