5
OVERVIEW OF INSTALLATION PROCEDURE:
BOTTOM EDGE
FRONT OF
DRAWER
4”
20”
location of the first
row of mounting holes
location of the Second
row of mounting holes
BEAM
SUPPORT
DETERMINE IF YOU WANT YOUR
DRAWER TO BE
FLUSH
TO
THE SIDE APRON OR
RECESSED
.
SIDE VIEW
OF TABLE
BOTTOM VIEW
OF TABLE
Beam Support
on your table
Beam Support
on your table
THE FRONT OF DRAWER
WILL GO ON THIS SIDE
OF THE TABLE
Please look at the pictures below and familiarize yourself with your pool table
and which side of the table you want to attach your accessory drawer to. When
fully assembled the Drawer should be flush to the
bottom edge
of the Side
Apron of your table (unless you want the Drawer recessed), this is why its
important to measure accurately before pre-drilling your holes. Continue to the
next page to start assembly, you will need a cordless drill, a 7/64” drill bit a
tape measure and a fine tip marker such as a Sharpie.
NOTE
:
OF SIDE APRON
