6
ASSEMBLY
INSTRUCTIONS
Step 1
1.
Loose the pre-assembly screws on the front /
rear stabilizer.
2.
Fasten front and rear stabilizers each with 4
screws and washers to the base construction.
3.
After assembly the bike can be adjusted to
slightly uneven ground by adjusting the height
of the foot caps in the back. The pre-assembled
transportation wheels in the front allow easy
maneuverings of the bike:
Step 2
1.
Screw the pedals onto the crank. The pedals are
marked with R and L at the screw.
2.
Tighten the left pedal anti-clockwise, the right
pedal clockwise.
Step 3
1.
Assemble the saddle with horizontal slider for
saddle post.
2.
Insert the saddle pole in the main frame,
choose the desired position and tighten the
knob. Ensure that the knob is always tightened.
Summary of Contents for LS2005
Page 5: ...5 EXPLODED DIAGRAM...