Figure 11
14.
With at least four capable people, raise
the backboard assembly up and have
the fifth person attach Lower Board Arms
to the Rim Support (# 21) on backboard
using one bolt (#8), two washers (#3),
two Plastic washers (#5) and one
thin locknut (#49). See Figure 11.
15.
22
23
Figure 10
21
Detail B
Detail A
This is a pivot point. Snug is tight enough.
Note: DO NOT over tighten these bolts.
This is a pivot point. Snug is tight enough.
Note: DO NOT over tighten these bolts.
12.
of bracket on each side of the Backboard (#23) as
shown in Detail A.
13.
Insert two Board Bushings (#33) in to the rim support
(#21). See Detail B.
Insert a Two Way Step Bushing (#22) in to the inside
Note: If the Step Bushing (#22) and Board Bushing (#33)
are not already pre-installed follow step 12 and 13.
Detail A2
5
49
Attach Upper Board Arms to the
inside
of upper mounting
brackets on the backboard using two bolts (#20), four Washers
(#3), four Plastic Washers (#5) and two Locknuts (#4).
See Figure 11 and Detail A2.
Note:
Be sure to install upper board arms to the
INSIDE
of backboard mounting brackets.
HANDLE BACKBOARD WITH CARE, IT IS A GLASS
PRODUCT. ALWAYS WEAR SAFETY GLASSES AND
GLOVES WHEN HANDLING GLASS.
ATTACHING BACKBOARD TO BOARD ARMS REQUIRES
AT LEAST FIVE CAPABLE ADULTS.
11
Summary of Contents for GOALRILLA B5000
Page 2: ...2 ...
