Figure 12
Figure 13
18.
If further leveling is required loosen top #35 nuts but do not
loosen past the top of #39 “J” Bolt.
DO NOT REMOVE NUTS
#35
Place a level on pole and adjust bottom nuts #35 with a
.
15/16” open end wrench until pole is level. Tighten top #35 hex
nuts. See Detail C.
Detail C
35
39
35
(Bottom)
NOTE: DO NOT
remove top Nut #35
(Bottom)
(Top)
INSTALL RIM EXACTLY AS SHOWN. FAILURE
TO DO SO COULD DAMAGE GLASS.
it is level. Finish tightening the four nuts.
Place a level across rim assembly and adjust rim until
17.
Mount Goal Assembly (#28) to Backboard as
shown in
Figure 12
, using four bolts (#29),
washer (#26) and four nuts (#24). Tighten
Fasteners but leave loose enough to level rim.
16.
NEVER USE RIM WITH COVERPLATE REMOVED!
Two adults are recommended for this step, one
to level and one to adjust the bottom #35 nuts.
NOTE:
12
Summary of Contents for GOALRILLA B5000
Page 2: ...2 ...
