ESCALADE GB60YG, Owner'S Manual

Page: 21 / 46

1 3M-6850-00 4" Square Tube Plug
2 1A-7686-30 Bottom Post
3 8S-6898-30 Top Post
4 901-28 3/8-16 Nylon Lock Nut
5 3M-6883-00 1-1/4" OD Plastic Washer
6 8S-6630-30 Upper Board Arm
7 1B-6483-10 3/8-16 X 7.5" Hex Bolt-Grade 5
8 3M-6269-00 1/4" Spacer
9 3M-6548-00 1 X 2 Tube Plug
10 8S-6657-01 Stop Spacer
11 1A-6331-30 Lower Board Arm
13 3M-8941-00 Actuator Cap (With hole)
14 8S-6658-01 Pivot Tube
15 3M-6542-00 Actuator Sleeve
16 4A-6605-00 Actuator
17 4L-7501-00 Height Decal
18 701-50 3/8 STD Washer
19 1B-6486-10 1/2-13 X 1-1/2" Hex Bolt
20 2B-6093-00 1/2 Flat Washer
21 2B-6095-00 1/2-13 Nylon Lock Nut
22 1B-6484-10 3/8-16 X 7" Hex Bolt-Grade 5
23 6A-7404-30 Backboard Assembly-60x33” Glass
24 1B-6195-00 3/8-16 X 2.75" Hex Bolt
Key# Part # Description Qty. Key# Part # Description Qty.
25 1B-6485-10 3/8-16 X 5" Hex Bolt 2
26 2B-6114-00 3/8 Flat Washer 4
27
28
6A-6374-01 Goal Assembly 1
29 Not Used
30 2S-6795-01 Post Ear 2
31
32
2S-6427-01 Rim Cover Plate 1
33 1B-6788-00 #8 x 1/2 Thread Forming Scr. 4
34 3M-9040-00 5/8 Thread Protector 4
35 2B-6097-00 5/8-11 Hex Nut 12
36 2B-6099-00 5/8 Split Lockwasher 4
37 2B-6098-01 5/8 SAE FLAT WSHR ZNC 8
38 2S-6453-00 Anchor Template 1
39 2B-6112-00 5/8-11 X 14 "J" Bolt 4
40 1S-6167-00 #3 X 30" Rebar 4
41 7B-6255-00 Pull Pin 1
42 4A-6606-00 Actuator Handle 1
43 2L-7638-01 This Manual 1
44 3M-6580-00 48" Board Pad Right 1
45 3M-6581-00 48" Board Pad Left 1
46 Not Used
47 3F-6010-00 Net 1
48 3M-8960-00 Post Pad 1
49 1B-6782-00 3/8-16 x 1 3/4" Carriage Bolt 4
50 Not Used
77 1B-6821-00 Self Tapping Screw-#10 x 1 1/8" 10
2L-7638-01
B7005CF REPLACEMENT PARTS LIST
Not Used
1
1
1
14
8
2
2
2
8
2
1
1
1
1
1
1
20
1
2
1
2
1
4
- BACKBOARD -
Items needed to clean backboard:
- 100% cotton soft cloth, (only)
- Glass Cleaner
Clean backboard using a 100% Cotton soft cloth and glass cleaner. Clean glass as you would household windows. Strong cleansers will damage
backboard and void warranty.
– RIM –
HANGING ON THE RIM WILL VOID YOUR WARRANTY. Rims are not warranted for any defects other than workmanship. Torn back plates,
damaged springs, bent rings, damaged eye bolts, and torn or distorted rim supports result from hanging on the rim and are not warranted.
The goal should not be cranked under 7-1/2' or over 10'. Adjustments of the goal should be done under adult supervision.
When attempting slam dunk activity you should always wear a mouth guard to avoid dental injury.
GOALIATH CARE INFORMATION
To ensure ease of operation, lubricate all pivot points at least every 6 months or as needed with a good lubricant such as WD-40.
Inspect your pole periodically, if rust should appear
, remove loose paint, sand lightly, primer and paint with exterior flat matte finish
enamel paint.
– MAINTENANCE –
– RUST –
12 NOT USED
21
Not Used