© 2018 Escalade Sports
For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
PARTS REQUIRED:
FIGURE 2
8 pcs -
H2
Flat Washer
2 pcs -
P2
End Apron
8 pcs -
H5
Allen Head Bolt
2 pcs -
A2
6mm Allen Wrench
8 pcs -
H7
Phillips Round Head Screw 1 pc -
A3
4mm Allen Wrench
STEP 2:
Attach
P2
End Aprons to previous assembly
STEP 1
using
H5
Allen Head Bolts with
H2
Flat Washers as shown in
FIGURE 2
.
Do not tighten H5 Allen Head Bolts at this time.
Please make sure
P3
Playfield is flush with both ends of the
P2
End Apron. Tighten
H5
Allen Head Bolts using
A3
Allen
Wrench at this time.
Secure
P3
Playfield to
P2
End Apron using the pre-drilled holes with
H7
Screws as shown in
FIGURE 2
.
IMPORTANT NOTE: All screws must be screwed STRAIGHT down. Tighten, but do not strip out H7 Screws.
Use
Two
A2
Allen wrenches are supplied in order to equally tighten
the
H3
support rod nuts. Tighten, but do not overtighten the
H3 nuts as overtightening could result in a "bowed" playfield.
A2
Allen Wrenches to tighten
H3
Support Rod Nuts as shown in
FIGURE 2
.
P3
IMPORTANT NOTE:
Both Bottom and ends of the P1 Side Aprons
and P2 End Aprons must be flush with each
other before tightening H5 Allen Head Bolts.
IMPORTANT NOTE:
P3 Playfield must be flush with each
end of P2 End Aprons before
tightening H5 Allen Head Bolts.
P2
H7
H3
A2
H5
H2
H5
H2
P2
A3
