esatto.house
25
Maintenance and Cleaning (Continued)
WARNING!
Do not over tighten the filters. Put the filters back in the correct sequence and securely lock
in place, otherwise coarse debris could get into the system and cause a blockage or damage internally.
WARNING!
Never use the dishwasher without the filters in place. Improper replacement of the filter will
reduced the performance level of the dishwasher and may damage your dishes and utensils.
Note.
Failure to regularly clean the filter will increase the risk of debris entering the internal system and
causing damage to your appliance. Failure to follow the regularly maintenance steps outlined may lead to
voiding your Manufacturer’s warranty.
Cleaning the spray arms
It is necessary to clean the spray arms regularly, as hard water chemicals will clog the spray arm jets and
bearings.
To clean the spray arms, follow the steps below.
Step 1
To remove the upper spray arm, hold the nut and rotate the arm clockwise to remove it.
Figure 28- Removing the upper spray arm.
Step 2
To remove the lower spray arm, simply lift it in an upwards direction.
Figure 29- Removing the lower spray arm.
Step 3
Wash both spray arms in soapy warm water and use a soft brush (i.e. a tooth brush) to clean the jets.
Rinse well and replace them in your dishwasher.
Figure 30- Cleaning the spray arms.
