manualshive.com logo in svg

Esaote MyLab 9, Getting Started

Share
Download
Esaote MyLab 9 Getting Started Download Page 97

P E R F O R M I N G   A N   E X A M

MyLab

  -   G E T T I N G   S T A R T E D

7 - 5

GETTI

NG STARTED

At any time during the exam, a different probe can be selected tapping 

PROBE

or the new probe key on the touchscreen work flow area (available when

DIRECT PROBE SELECTION

 is enabled).

Selecting Application

When a probe has been selected, on the middle of the touchscreen all the
application available with the selected probe are displayed. Tap the name of
the desired application to set it.

The blue rounded application indicates the active one.

At any time during the exam, a different application can be selected tapping

PROBE

.

Selecting Preset

The Preset (or Clinical Setting) can be selected only when both the probe and
the application have been set. Tap the name of the desired preset to select it. 

The blue rounded preset indicates the active one.

At any time during the exam, a different preset can be selected tapping 

PROBE

.

At Preset selection the exam starts; the system enables the selected probe to
operate in the application and preset you selected.

WARNING

Before beginning the exam, ensure that the active probe displayed on the
screen matches the one selected.

Alternatively, the exam can be started also pressing 

EN D  EXAM

, 

END EXAM

 or

ST A RT  EX AM

.

NOTE

You can program and add presets to better suit your individual clinical

needs or preferences, while applications depend on the installed optional

licenses.

Summary of Contents for MyLab 9























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands