manualshive.com logo in svg

Esaote MyLab 9, Getting Started

Share
Download
Esaote MyLab 9 Getting Started Download Page 48

S Y S T E M   O V E R V I E W

MyLab

  -   G E T T I N G   S T A R T E D

3 - 12

Connections panels (8)

On the rear left side of the console two doors protect additional connections
panels.

The one on the lateral side on the system allows to access the PC ports like
auxiliary USB 3.0 ports and the headphone connector.

The USB ports can be used to connect a USB printer, a USB footswitch or a
USB digital archive medium.

The microphone has not current use.

The other door placed on the corner of the console allows to access
peripherals power connections and the fuse box.

The main switch, the power cable socket and an earth terminal are placed on
the rear-bottom of the system.

Wheel Brakes

MyLab

 is equipped with four rotational wheels. 

Each couple of wheels has a brake pedal (10 and 24) between them.

When the pedal is fully pressed down, the brake is engaged to avoid rotation
of wheels keeping the system stationary during use. To release the brake,
move the pedal to the middle position. 

When the pedal is fully up, the brake is engaged to avoid whirling of wheels
to aid in steering while moving the system. To release the brake, move the
pedal to the middle position.

Summary of Contents for MyLab 9























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands