Esaote MyLab 9, Getting Started

Page: 49 / 118

MyLab
- G E T T I N G S T A R T E D 4 - 1
Chapter
4
GETTI
NG STARTED
4. Preparing the System
The system will be installed by Esaote personnel. Esaote personnel will be
responsible for opening the packaging and ensuring that the system is
correctly programmed and operational.
The information and procedure provided in this chapter will guide to prepare
the system for use. Preparation includes connecting probes and external
devices, locking articulated components for moving, and ensuring that system
operating is met.
Acclimation Time
If the system has been exposed to temperatures which are outside the range
given for its correct working (15÷35°C), it must acclimate, before being
switched on. The following table indicates the necessary waiting times.
Table 4-1: Acclimation Time
Connecting the System to a Network
To use connectivity features, the system must be connected to a network.
The LAN plug is placed at the bottom of the rear side; it supports Gigabit,
10Base-T, and 100Base-T Ethernet LAN. An Esaote field engineer or your
network administrator must configure the system for network connectivity.
1. Turn off the system power.
2. Connect one end of the provided network connection cable
to the wall plug for your network.
3. Connect the other end of the cable to the network plug on
the system.
4. Turn on the system.
T(C°) 60 55 50 45 40 35÷15 10 5 0 -5 -10 -15 -20
Hours 8 6 4 2 1 0 1 2 4 6 8 10 12