manualshive.com logo in svg

Esaote MyLab 9, Getting Started

Share
Download
Esaote MyLab 9 Getting Started Download Page 111

T E C H N I C A L   S P E C I F I C A T I O N S

MyLab

  -   G E T T I N G   S T A R T E D

9 - 5

GETTI

NG STARTED

NOTE

Features, probes and applications availability is dependent on your system

configuration. Not all features, probes and applications are approved in all

Countries. Please refer to your Esaote local representative for further

information.

XStrain

XStrain allows to quantify endocardial velocities of contraction 

and relaxation and local deformation of the heart (Strain/

Strain Rate analysis).

XStrain 4D

XStrain 4D creates a volumetric model of the left ventricle 

(LV) based on the acquisition of standard apical views

(Strain/Strain Rate volumetric analysis)

XView

XView+

XView and XView+ enhance the pattern of every frame at the 

pixel level, eliminating speckle and noise artefacts.

a. Refer to www.esaote.com for further details on supported DICOM classes.
b. Refer to the corresponding Sales Area manager for further information.

Feature Description

Summary of Contents for MyLab 9























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands