ES&S DS200, Troubleshooting Manual, Page: 3 / 13

P a g e | 3
July 2018
DS200 PRINTING ISSUES
Problem: Machine starts up, but stops prior to printing zero tape
Cause: Printer compartment door not latched
Solution:

Press printer compartment door down

Listen for the “ click ” when door latches

Press “ ok ” button

Press “ resume ” button
If Solution Unsuccessful

CALL YOUR CLERK
Problem: Machine is printing, tape is feeding, but no text shows
Cause: Tape roll is installed incorrectly
Solution:

Press red “ cancel printing ” button on screen

Open access panel, press blue lever to open printer tape compartment

Remove print tape roll, turn so that tape feeds from the right side of the roll
(as you face the machine) like this

Pull a small amount of tape out of the compartment (to get it started) and
snap printer compartment closed

Press “ ok ” button

Press “ resume ” button - Tape should begin printing right away
If Solution Unsuccessful

If unsuccessful, press “ cancel printing ” button again

CALL YOUR CLERK