ESAB Powercut 650, Instruction Manual, Page: 8 / 56

8
Optional Accessories
torch guide Kits
The Deluxe kit, in a rugged plastic carrying case, includes
attachments for circle and straight line cutting on ferrous and
non-ferrous metals
Deluxe: 1 3/4" - 42" Radius ..........................................................0558003258
Basic: 1 3/4" - 28" Radius ..............................................................0558002675
plasma flow measuring Kit
This valuable troubleshooting tool allows measurement of
the actual plasma gas flow through the torch ................................ 19765
input receptacle
230Vac/50Amp, 3 Prong ........................................................................674540
torch Wrap and spare parts Kit holder
This enables operator to store S/P Kit, wrap torch and
work cable for easy transport and storage ...........................0558003398
Wheel Kit
For easy transport of system ......................................................0558003399
Electrode
20862
Swirl Baffle
20463
Seat
19679
Plunger
20324
Heat Shield
20282
Nozzle
20860
PT-31XLPC Spare Parts Kit (P/N 0558003301) includes:
Heat Shield (1) .................................................................................................. 20282
Nozzles (3) .......................................................................................................... 20860
Swirl Baffle (1) ................................................................................................... 20463
Electrodes (2) .................................................................................................... 20862
PT-31XLPC Replacement Torch
......................................... 0558003183
Torch comes assembled with Heat Shield, Nozzle, Electrode, and Swirl
Baffle.
powercut shown with optional torch Wrap
and spare parts Kit holder installed.
2.0 general
The Powercut 650 is a compact, completely self-contained
plasma cutting system. As shipped, the system is fully as-
sembled and ready to cut after being connected to input
power and a source of prefiltered compressed air (90-150
psi). The Powercut 650 package uses the PT-31XLPC torch
to deliver cutting power for materials up to 5/8-in. thick or
for severing up to 3/4-in. thick.
2.1 scope
The purpose of this manual is to provide the operator with
all the information required to install and operate the Pow-
ercut 650 plasma arc cutting package. Technical reference
material is also provided to assist in troubleshooting the
cutting package.
Do not use any torch with this power source other than the esaB
brand pt-31xlpc torch. serious injury may occur if used with any
other torch.
Torch Body
*
0558000790
(20072)
*
Includes the following items:
Seat - 0558000510 (19679)
O-ring - 0558000514 (950790)
section 2 introDuction