7
1.1 GENERAL
The PowerCut-550 is a compact, completely self-
contained plasma cutting system. As shipped, the
system is fully assembled and ready to cut after
being connected to input power and a source of
prefiltered compressed air (90-150 psi). The
PowerCut-550 package uses the PT-31XL torch
to deliver cutting power for materials up to 1/2
inch thick or for severing up to 5/8-in. thick. Refer
to the following paragraphs for descriptions of the
PowerCut-550 packages available as well as
performance specifications.
Do not use any torch with this power source
other than the ESAB brand PT-31XL torch.
Serious injury may occur if used with any
other torch.
1.2 SCOPE
The purpose of this manual is to provide the
operator with all the information required to install
and operate the PowerCut-550 plasma arc cutting
package. Technical reference material is also
provided to assist in troubleshooting the cutting
package.
1.3 PACKAGE AVAILABLE
PowerCut-550 .............................................................................................................. P/N 0558002612
includes:
Console with Regulator and Work Cable
Torch
Spare Parts Kit
SECTION 1
DESCRIPTION
