ESAB POWERCUT-1250, Instruction Manual

Page: 23 / 48

23
Figure 3-4. Installation and Operation of Stand-off Guides
SECTION 3 OPERATION
THIN GAUGE MATERIALS
CAN BE CUT WITH 1/16" (1.6 mm)
TORCH-TO-WORK DISTANCE
ADJUST TO 3/16" (4.8 mm) FOR
MATERIALS OVER 1/4" (6.4 mm) THICK
ADJUST GUIDE BY TURNING
IN A CLOCKWISE DIRECTION
ONLY. THIS WILL PREVENT
ACCIDENTAL LOOSENING
OF SHIELD.
STEEL GUARD
STAND OFF GUIDE
P/N 0558002393
IF GUIDE IS TOO TIGHT ON SHIELD,
OPEN SLOT WITH SCREWDRIVER.
IF TOO LOOSE, CLOSE
SLOT WITH VISE OR
LARGE PLIERS.
1/16" (1.6 mm) TO 1/4" (6.4 mm)
TORCH-TO-WORK
GUIDE AGAINST
STRAIGHT EDGE
OR FREE-HAND
CUT
3.3.2 INSTALLATION AND USE OF STAND-OFF GUIDE