ESAB POWERCUT-1250, Instruction Manual

Page: 14 / 48

14
SECTION 1 DESCRIPTION
1.1 GENERAL
The Powercut-1250 / 1500 is a compact, completely self-contained plasma
cutting system. As shipped, the system is fully assembled and ready to cut
after being connected to input power and a source of compressed air (90-
150 psi). The Powercut package uses the heavy-duty PT-32EH torch to deliver
cutting power for severing materials up to 1-1/2 inch thick. Refer to the
following paragraphs for descriptions of the Powercut packages available as
well as performance specifications.
1.2 SCOPE
The purpose of this manual is to provide the operator with all the information
required to install and operate the Powercut plasma arc cutting package.
Technical reference material is also provided to assist in troubleshooting the
cutting package.
Use only The ESAB PT-32EH Plasmarc
torch with this console. Use of torches
not designed for use with this console
could create an ELECTRIC SHOCK
HAZARD.
Thickness Cutting
Material (In.) Speed (IPM)
Carbon Steel 1/16 200
1/8 98
1/4 36
3/8 18
1/2 11
Stainless Steel 1/16 138
1/8 58
1/4 18
3/8 10
1/2 6
Aluminum 1/16 200
1/8 110
1/4 48
3/8 17
1/2 14
PT-32EH DRAG MODE CUTTING SPEEDS
AIR @ 80PSI and OUTPUT CURRENT 40AMPS