ESAB POWERCUT-1250, Instruction Manual

Page: 2 / 48

2
These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the principles
of operation and safe practices for arc welding and cutting equipment, we urge you to read our booklet,
"Precautions and Safe Practices for Arc Welding, Cutting, and Gouging," Form 52-529. Do NOT permit
untrained persons to install, operate, or maintain this equipment. Do NOT attempt to install or operate
this equipment until you have read and fully understand these instructions. If you do not fully
understand these instructions, contact your supplier for further information. Be sure to read the Safety
Precautions before installing or operating this equipment.
BE SURE THIS INFORMATION REACHES THE OPERATOR.
YOU CAN GET EXTRA COPIES THROUGH YOUR SUPPLIER.
USER RESPONSIBILITY
This equipment will perform in conformity with the description thereof contained in this manual
and accompanying labels and/or inserts when installed, operated, maintained and repaired in
accordance with the instructions provided. This equipment must be checked periodically.
Malfunctioning or poorly maintained equipment should not be used. Parts that are broken,
missing, worn, distorted or contaminated should be replaced immediately. Should such repair
or replacement become necessary, the manufacturer recommends that a telephone or written
request for service advice be made to the Authorized Distributor from whom it was purchased.
This equipment or any of its parts should not be altered without the prior written approval of the
manufacturer. The user of this equipment shall have the sole responsibility for any malfunc-
tion which results from improper use, faulty maintenance, damage, improper repair or alter-
ation by anyone other than the manufacturer or a service facility designated by the manufac-
turer.