ESAB Origo Tig 3000i, Instruction Manual

Page: 15 / 28

-- 15 --
bt30d1ea
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!
3 INTRODUCTION
The Tig 3000i is a TIG welding power source, which can also be used for MMA
welding.
ESAB’s accessories for the product can be found on page 25 .
3.1 Equipment
The power sources is supplied with:
Instruction manual for the welding power source, instruction manual for the control
panel and 5 m return cable.
3.2 Control panel
The units are supplied with one of the following control panels:
TA23 TA24
See the separate instruction manual for a detailed description of the control panel.
GB