ESAB Origo Mig L305, Instruction Manual

Page: 14 / 28

5 OPERATION
0349 301 124
- 14 -
© ESAB AB 2017
5 OPERATION
General safety regulations for handling the equipment can be found in the "SAFETY"
chapter of this manual. Read it through before you start using the equipment!
WARNING!
Secure the equipment - particularly if
the ground is uneven or sloping.
5.1 Connection and control devices
1 Mains supply switch 8 Connection for return cable (-), high
inductance
2 Main supply switch for cooling unit 9 Connection for return cable (-), low
inductance
3 Switch, precise control 10 Connection for welding current cable (+)
4 Switch, coarse control 11 Connection for control cable for wire
feeder
5 Indicating lamp, power supply ON 12 Connection RED for cooling water from
the wire feed unit
6 Orange indicating lamp, overheating 13 Connection BLUE for cooling water to the
wire feed unit
7 Digital instrument V/A*
NOTE!
*Digital instrument V/A only available on certain models.