ESAB Origo M 12 Feed 304, Instruction Manual

Page: 6 / 32

© ESAB AB 2003
- 6 -
bm33d1ea
The wire feed unit can be installed either at the power source, suspended above the
workplace, on a support arm or on the floor with or without wheel set.
ESAB's accessories for the product can be found on page 25 .
2.1 Equipment
The Feed 304 wire feed unit is supplied with:
Instruction manual
Stickers with recommended wear parts.
The Feed 484 wire feed unit is supplied with:
Spacer (4)
Hex key wrench (4 mm)
Instruction manual
Stickers with recommended wear parts.
3 TECHNICAL DATA
Feed 304 Feed 484
Power supply 42 V 50 - 60 Hz 42 V 50 - 60 Hz
Power requirement 336 VA 378 VA
Motor current I
max
8 A 9 A
Settings data
Wire feed speed
Burnback time
Creep start
2/4 stroke
1.9-25.0 m/min
0-0.5 s
OFF or ON
2 stroke or 4 stroke
1.9-25.0 m/min
0-0.5 s
OFF or ON
2 stroke or 4 stroke
Welding gun connection EURO EURO
Max. diameter wire bobbin 300 mm (*440mm) 300 mm (*440mm)
Wire dimension 0.6-1.6 mm 0.6-2.4 mm
Weight
basic version
with sealed bobbin holder 11.5 kg
15 kg 14.5 kg
19 kg
Dimensions (l x w x h)
basic version
with sealed bobbin holder 380 x 275 x 400 mm
690 x 275 x 420 mm 380 x 275 x 400 mm
690 x 275 x 420 mm
Shielding gas
max pressure
All types intended for
MIG/MAG welding
5 bar
All types intended for
MIG/MAG welding
5 bar
Coolant
max pressure
50% water / 50% glycol
5 bar
50% water / 50% glycol
5 bar
Permissible load at
60% duty cycle 630 A 630 A
Enclosure class
with wire bobin *440mm
IP23
IP2X
IP23
IP2X
* Accessory, see page 25.
GB