ESAB MobileFeed 300 AVS, Instruction Manual

Page: 21 / 52

21
taBle 1-1 specIfIcatIons
Wire Feed Speed 50 - 800 in./min. (1.3 - 20.3 m/min.)
Maximum open circuit voltage 100 vdc (113 vdc peak)
Wire diameters Hard: .030” (0.8mm), .035” (0.9mm), .045” (1.2mm), .052” (1.4mm), 1/16” (1.6mm)
Soft: .035” (0.9mm), 3/64” (1.2mm), 1/16” (1.6mm)
Cored: .030” (0.8mm), .035” (0.9mm), .045” (1.2mm), .052” (1.4mm), 1/16” (1.6mm), 5/64” (2.0mm)
Wire package 12” (305mm) diameter spool
Motor type DC permanent magnet pre-lubricated, totally enclosed
Brake type (wire) Drag
Control Solid State
Feed System Push
On-Off Switch Standard
Run in start Automatic if required.
Height 17.19” (437mm)
Width 8.56” (217mm)
Length 20.69” (526mm)
Weight (with contactor, without spool) 32 lbs. (14.5Kg)
Enclosure class IP-23
Permissible load at
80% duty cycle 450 A
100% duty cycle 400 A
Input voltage range 15/99V @ 7A
1.1 general
This manual has been prepared especially for use in famil-
iarizing personnel with the design, installation, operation,
maintenance, and troubleshooting of this equipment. All
information presented here-in should be given careful
consideration to assure optimum performance of this
equipment.
1.2 receIVIng-hanDlIng
Prior to installing this equipment, clean all packing mate-
rial from around the unit and carefully inspect for any
damage that may have occurred during shipment. Any
claims for loss or damage that may have occurred in transit
must be filed by the purchaser with the carrier. A copy of
the bill of lading and freight bill will be furnished by the
carrier on request if occasion to file claim arises.
The MobileFeed 300 AVS will fit through a 17.75” (451mm) dia. hole.
1.3 DescrIptIon
The MobileFeed 300 AVS is a portable wire feeder designed
for maximum versatility. The unit is powered entirely on
the arc voltage from a constant current or constant volt-
age welding power source. All models include a secondary
contactor for added operator safety.
The unit is designed for use with hard, soft, and cored
electrodes (gas shielded or self-shielded) from 0.03”
(0.8mm) through 5/64” (1.98mm) diameter with wire feed
speed from 50 to 800 IPM (1.8-20.3 m/min.). The feeder
components are totally enclosed in a rugged case for
optimum mobility.
note
The MobileFeed 300 AVS is not recommended for
short-circuiting transfer using constant current
power sources due to the limited short circuit
current available on constant current power
sources.
sectIon 1 DescrIptIon