ET 220I AC/DC
Manual 0-5346
INSTALLATION, OPERATION AND SETUP
3-23
• First, select Stick Mode by pressing the Welding Mode (10) button.
Welding Type
Welding Mode Selection
Stick Mode
T
4T
2T
• Then, select Welding Type by pressing the welding Type (17) button.
Welding Type
Welding Type Selection
DC Negative Stick
DC Positive Stick
3.15 Stick (SMAW) Programming Mode
T
4T
2T
Art # A-12849
Figure 3-12: Stick Programming Mode
• Press the WELDING MODE (10) button to select SMAW mode. The SMAW LED (11) will illuminate.
• Following SMAW operating modes are available.
DC Negative mode. DC Negative LED (19) will illuminate.
DC Positive mode. DC Positive LED (20) will illuminate.
• Press the BACK button (22) or FORWARD button (23) so the Electrode Diameter LED (41) and Inches LED (29) are illuminated.
Use the Multi Function Control (24) to adjust the Electrode size being used.
• Press the BACK button (22) or FORWARD button (23) so the Hot Start Amps LED (40) and % LED (35) are illuminated.
