6 CONTROL PANEL
0463 416 001
- 23 -
© ESAB AB 2017
6.2
ET 300iP
1.
Button to change between direct current
and pulse current.
12.
Background current indicator.
2.
Display, shows set or measured value.
13.
Pulse frequency indicator.
3.
Button to select welding method: TIG HF,
LiftArc™ or MMA.
14.
Slope down indicator.
4.
Set indicator.
15.
Gas post flow indicator.
5.
Button to select 2-stroke or 4-stroke (TIG
only).
16.
Button to change between the parameters
in the graph.
6.
Button to activate and deactivate remote
control unit.
17.
Indicates which is shown in the display:
s (seconds for gas pre flow, gas post flow,
slope up and slope down), % (pulse
balance), Hz (pulse frequency).
7.
Knob for setting data.
18.
Current set and measure value / Voltage
measure value.
8.
Gas pre flow indicator.
19.
Parameter selection button, selection
indicated by (18). Also used for access to
hidden functions.
9.
Slope up indicator.
20.
Overheating indicator.
10.
Direct current or pulse current indicator.
21.
VRD function (reduced open-circuit
voltage) indicator.
11.
Pulse balance.
Summary of Contents for ES 300i
Page 2: ......