ESAB Cigweld EasyWeld 160 Operating Manual Download | Manualshive

Page: 2 / 84

background image

EasyWeld / HandyWeld 160

WE APPRECIATE YOUR BUSINESS!

Congratulations on your new CIGWELD product. We are proud to have you
as our customer and will strive to provide you with the best service and
reliability in the industry. This product is backed by our extensive warranty
and world-wide service network.

This Operating Manual has been designed to instruct you on the correct
use and operation of your CIGWELD product. Your satisfaction with this
product and its safe operation is our ultimate concern. Therefore please
take the time to read the entire manual, especially the Safety Precautions.
They will help you to avoid potential hazards that may exist when working
with this product.

We have made every effort to provide you with accurate instructions,
drawings, and photographs of the product(s) while writing this manual.
However errors do occur and we apologize if there are any contained in
this manual.

Due to our constant effort to bring you the best products, we may make
an improvement that does not get reflected in the manual. If you are ever
in doubt about what you see or read in this manual with the product you
received, then check for a newer version of the manual on our website or
contact our customer support for assistance.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

CIGWELD is a Market Leading Brand of Arc Welding Products for ESAB.
We are a mainline supplier to major welding industry sectors in the Asia
Pacific and emerging global markets including; Manufacturing, Construc-
tion, Mining, Automotive, Engineering, Rural and DIY.

We distinguish ourselves from our competition through market-leading,
dependable products that have stood the test of time. We pride ourselves
on technical innovation, competitive prices, excellent delivery, superior
customer service and technical support, together with excellence in sales
and marketing expertise.

Above all, we are committed to develop technologically advanced products
to achieve a safer working environment for industry operators.

«
1
2
3
4
...
»

Summary of Contents for Cigweld EasyWeld 160





















































































Reviews:

No comments

Related manuals for Cigweld EasyWeld 160

Brand: Abus Pages: 162

Brand: Abus Pages: 82

FSA ECO SR-EFR BG

Brand: Eco Pages: 23

Brand: FAAC Pages: 4

Brand: FAAC Pages: 30

Brand: Abus Pages: 14

Brand: BSM Pages: 17

Brand: BRAVILOR BONAMAT Pages: 76

Brand: LONGHORN Pages: 15

Brand: Arcteq Pages: 122

Brand: Aiwa Pages: 20

Brand: Bowers & Wilkins Pages: 1

Brand: TITANCUT Pages: 44

Hydro-Guard HG-3

Brand: Mueller Pages: 7

Brand: Nexus 21 Pages: 24

Brand: Dannmar Pages: 85

Brand: TAD Pages: 2

Brand: EAW Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands