Erskine Attachments 620RP, Operator'S Manual, Page: 4 / 36

4
Operation and Maintenance Manuals are written to
give the owner/operator instructions on the safe
operation and maintenance of the product. For your
safety and the safety of other persons, you must
not operate, service, inspect or otherwise handle
this equipment before you have reviewed and
understood the Operation and Maintenance
Manual(s) pertaining to the tractor (also referred to
as “machine”) and the tractor mounted work tool
(also referred to as “attachment”).
Throughout this manual reference may be made to
the left hand (LH) or right hand (RH) side. These
terms are used as viewed from the operator’s seat
facing forward.
In order to get the optimum performance and
efficiency that has been designed into this product,
read this manual thoroughly before setting-up,
operating, or performing maintenance procedures
on the machine.
It is the responsibility of the user to read the
operator’s manual and comply with the safety
instructions, operating instructions and
maintenance guidelines set forth in this manual.
The user is responsible for inspecting the machine,
power unit and attachment daily, and for having
parts repaired or replaced when continued use
would cause damage, excessive wear to other
parts or make continued operation unsafe.
The signal words
CAUTION, WARNING, or
DANGER are used to indicate degree of hazards
and to warn against unsafe practices that may
cause personal injury and are used with
appropriate safety instructions. These signal words
are not to be ignored; your safety is involved.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
DANGER: Indicates a potentially
hazardous situation which, if not
avoided, will result in death or
serious injury.
The word NOTE is used to convey information that
is out of context with the manual text; special
information such as specifications, techniques,
reference information, and other information of a
supplementary nature.
The word
IMPORTANT , is used in the text when
immediate damage will occur due to improper
technique or operation.
IMPORTANT will apply to
the same information specified by NOTE , only of an
immediate and urgent nature.
Erskine Attachments LLC cannot anticipate every
possible circumstance that might involve potential
hazard. The safety messages found in this manual
and on the attachment are therefore not all
inclusive. If an operating procedure, tool device,
maintenance or work method not specifically
recommended is used; you must satisfy yourself
that it is safe for you and others. You must also
ensure that the attachment will not be damaged or
made unsafe by the procedures you choose.
FOREWORD
To The Owner/Operator:
DO NOT use or operate this machine until this manual has been read and
understood. If you require additional information, contact your Dealer or
Erskine Attachments LLC.