29
8.1 Working modes
These are the different types of operation or states the door can work in. There 6 different working modes that can be
selected by using the digital or the rotary key selector:
1.- Door open
The door opens and remains open in the maximum opening position.
2.- Door closed
The door closes and stays closed. The door remains in closed position even if the sensors are activated and until the
mode changes. If electrolock is installed the door is closed and locked so that no one can enter.
3.- Automatic ( two way)
This is the most common working mode. This mode allows traffic in both directions, so that all the detection devices are
enabled. The door will remain closed until one of the devices is activate. If any device activates the door will open and
after a hold-open time (adjustable) it will close again until further detection.
4.- Exit (one way automatic)
This allows traffic to exit to the exterior. In this direction, it works as "two-way automatic" and for people exiting and as a
"Door Closed " mode for people entering.
5.- Winter mode ( partial automatic)
This works the same as “automatic” mode but with a reduced or partial opening distance. This opening distance can be
adjusted by digital selector. By default it is 70% of the maximum opening distance.
Winter mode functioning is different with the digital selector or key selector. With the digital selector when we push
“winter mode” it will work in partial opening in these working modes : “automatic, “exit” and “door open”.
With key selector “winter mode” only works in automatic.
6.- Manual mode
In manual mode, the door stops and the motor is released. Thus , the door can be esaily moved manually and left in the
required position. It´s very usefull if the door has instaled a manual lock. In this case, the door and lock will be closed
manually.
When you change to other working mode, the door goes to the closed position in slow motion and then the mode
changes to the selected one.
