C
HRONO
D
IVER
(Valjoux 7750)
Operating Instructions
C
HRONO
D
IVER
Setting the Time:
To set the time, you must first unlock the
Winding Crown
(1) by turning it counter-clockwise (CCW),
then pull the crown out into position -2- and turn counter-clockwise (CCW). Keep turning
the crown until the hands pass 12 o’clock midnight and the day/date display advances.
Then continue to turn the crown until you set the correct time. This will assure a correct
setting of your watch in relation to AM/PM. After the time has been adjusted correctly,
the watch is set in motion by pressing the winding crown back to its ‘normal position’.
The crown must be re-tightened and locked down before the watch can be worn.
The
Perpetual Second Hand
(5) remains stationary to allow the watch to become
synchronized for precise accuracy.
Setting the Day / Date:
5
Perpetual Second Hand
6
Chronograph 30-Minute Hand
7
Chronograph 12-Hour Hand
8
Date Window
9
Day Window
10
Chronograph Start / Stop Pusher
11
Chronograph Reset Pusher
12
Luminous Mark
1
Winding Crown
•
Normal Position: Locked Down
•
Position 1: Manual Wind
•
Position 2: Day/Date
•
Position 3: Time Adjustment
2
Hour Hand
3
Minute Hand
4
Chronograph Second Hand
13
12
After an extended period of non-use, the movement must be set in motion
by winding the crown clockwise in its normal position.
To change the day setting, pull the
Winding Crown
(1) out into position -2- and turn clockwise
(CW) or turn the crown counter-clockwise (CCW) to change the date setting.
The Timer Functions:
Press the
Start/Stop Pusher
(10) and the chronograph is set in motion. Pressing the
same pusher again stops the chronograph hands, allowing you to read the elapsed time
with a precision of 1/5 second. After pressing the
Start/Stop Pusher
(10) again, the hands
will continue to move (additional movement). Start-stop-start operations can be carried out as
often as required. By pressing the
Reset Pusher
(11) when the chronograph has been stopped,
all three timer hands are reset to zero.
Rotatable Bezel for Diving:
Display of elapsed time by means of a Unidirectional Rotatable Bezel.
Turn bezel counter-clockwise (CCW) to mark
Minute Hand
(3) with/at luminous
Triangle Marker
(12). Bezel scaled for 60 minutes.
PLEASE BE ADVISED: engaging the day/date function when dial hands
are between
8
pm -
2
am can cause serious damage to the calendar gears
of the internal movement and such damage is not covered under warranty.
Summary of Contents for ChronoDiver
Page 1: ...INTERNATIONAL WARRANTY OPERATING INSTRUCTIONS...
Page 3: ...1...
