Ernst Benz ChronoDiver, Operating Instructions Manual

Page: 8 / 11

C
HRONO
L
UNAR
(Valjoux 7751) Operating Instructions
C
HRONO
L
UNAR
1 Winding Crown
•
Normal Position: Manual Wind
•
Position 1: Date/Month Adjustment
•
Position 1: Moon Phase Adjustment
•
Position 2: Time Adjustment
2 Day Adjustment
3 Hour Hand
4 Minute Hand
5 Chronograph Second Hand
6 Date Hand
7 Month Window
8
Day Window
9 Chronograph 30-Minute Hand
10 24-Hour Hand
11 Chronograph 12-Hour Hand
12
Start/Stop Pusher
13 Reset Pusher
14 Moon Phase Display
15 Perpetual Second Hand
11 10
After an extended period of non-use, the movement must be set in motion
by winding the crown clockwise in its normal position.
Setting the Time:
To set the time, pull the Winding Crown (1) out into position -2- and turn it counter-clockwise
(CCW). Keep turning the crown until the hands pass 12 o’clock midnight and the
day/date display advances. Then continue to turn the crown until you set the correct time.
This will assure a correct setting of your watch in relation to AM/PM and assure that
the
24-Hour Hand (10) is set correctly. After the time has been adjusted correctly, the
watch is set in motion by pressing the winding crown back to its ‘normal position’.
The
Perpetual Second Hand (15) remains stationary to allow the watch to become
synchronized for precise accuracy.
Setting the Day, Date, Month & Moon Phase:
To change the date and month, pull the Winding Crown (1) out into position -1- and turn
counter-clockwise (CCW). To change the moon phase, turn the crown clockwise (CW).
The day is set by pressing the
Day Adjustment Push-Piece (2) with a pointed instrument.
The Timer Functions:
Press the Start/Stop Pusher (10) and the chronograph is set in motion. Pressing the same
pusher again stops the chronograph hands, allowing you to read the elapsed time with
a precision of 1/5 second. After pressing the
Start/Stop Pusher (10) again, the hands will
continue to move (additional movement). Start-Stop-Start operations can be carried out
as often as required. By pressing the
Reset Pusher (11) when the chronograph has been
stopped, all three timer hands are reset to zero.
PLEASE BE ADVISED: engaging the day/date function when dial hands
are between
8
pm -
2
am and engaging the moon between 8pm - 6am can
cause serious damage to the calendar gears of the internal movement
and such damage is not covered under warranty.