C
HRONO
F
LITE
GMT
GMT
(ETA 2893-2)
Operating Instructions
1
Hour Hand
2
Minute Hand
3
Second Hand
4
Date Indicator
5
Universal Time Indicator Bezel
6
GMT/24-Hour Hand
15
14
To change the date, pull the
Winding Crown
(7) out into position -2- and turn clockwise (CW).
To change the
24-hour Hand
(6), turn the crown counter-clockwise (CCW) and rotate
the hand until you have reached your desired time indication.
Rotatable Bezel for Dual Time:
A bi-directional
GMT/Universal Time Indicator Bezel
(5), which is set to the
GMT/24-Hour
Hand
(6), allows for reading the time of any other time zone the user is observing.
7
Winding Crown
•
Normal Position: Locked Down
•
Position 1: Manual Wind
•
Position 2: Date Indicator
•
Position 2: 24-Hour Hand
•
Position 3: Time Adjustment
After an extended period of non-use, the movement must be set in motion
by winding the crown clockwise in its normal position.
Setting the Time:
To set the time, you must first unlock the
Winding Crown
(7) by turning it counter-clockwise
(CCW), then pull the crown out into position -3- and turn clockwise (CW). Keep turning
the crown until the hands pass 12 o’clock midnight and the day/date display advances.
Then continue to turn the crown until you set the correct time.
This will assure a correct setting of your watch in relation to AM/PM.
A second time zone can be selected by means of the
GMT/24-Hour Hand
(6)
which completes one revolution in 24-hours.
After the time has been adjusted correctly, the watch is set in motion by pressing
the winding crown back to its ‘normal position’.
The crown must be re-tightened and locked down before the watch can be worn.
Setting the Date and 24-Hour Hand:
PLEASE BE ADVISED: engaging the day/date function when dial hands
are between
8
pm -
2
am can cause serious damage to the calendar gears
of the internal movement and such damage is not covered under warranty.
Summary of Contents for ChronoDiver
Page 1: ...INTERNATIONAL WARRANTY OPERATING INSTRUCTIONS...
Page 3: ...1...
