ERL 8700/BUS, User Manual

Page: 41 / 166

3 Using the IED (Getting Started)
D01908R02.12 B-PRO User Manual 8700 3-11
Load From Offliner
You can download the settings file into the relay using the terminal mode
menu.
1 On the Window’s desktop, double-click B-PRO O
ffliner Settings icon. The
initial Offliner Settings screen appears.
2 Enter the required settings.
3 Save the settings to a file on your PC.
4 Start the Terminal Mode of B-PRO, login as
change or service, then access
the Settings menu and activate Load from Offliner function.
5 Reply Yes to the “Ready to load remote setting.” prompt.
6 In your terminal program, initiate transfer of the setting file created in step
2 above. (For example, with Window’s HyperTerminal, you would select
Transfer , then Send File . Browse to find the file, then select Open and fi-
nally, Send .
7 When the file has been transferred, verified and loaded, a message “New
settings loaded and secure” is displayed.
Retrieve To Offliner
To transfer the relay’s current settings to the PC do the following:
1 Navigate to
Settings>Retrieve To Offliner .
2 Select Enter.
3 The relay asks you if you wish to continue. Select Y for yes.
4 The file is sent to the directory defined by the HyperTerminal menu Trans-
fer>Receive File .
Records Submenus - List, Fault Recording, Swing Recording.
Output Matrix This is where the relay’s protection devices, external inputs, virtual
inputs, and ProLogics can be configured to close output contact(s)
or trigger recordings.
Recording This screen contains the settings for setting the length of fault and
swing recording.
A “serial number discrepancy” message may appear. This is to en-
sure that you are aware of the exact relay to which the settings are
being loaded. If this happens, check the relay serial number using
the terminal mode ID menu item. Type this serial number into the
B-PRO Serial No. box in the Identification tab display area of
Of-
fliner Settings. Alternately you may check the Ignore Serial Number
check box to bypass serial number supervision.
When using HyperTerminal use Z-modem (no crash recovery), files
are received and auto incremented.
www
. ElectricalPartManuals
. com