Ericsson T28z User Manual Download

Page: 88 / 128

The Profile Concept

Your phone includes a number of pre-programmed profiles. A profile is a

group of settings which are set to suit a certain environment. For example,

when you go to a meeting, you can just choose the Meeting profile and a

number of settings that suit a meeting are set.

Some accessories can choose a profile automatically. For example, when you

place your phone in a vehicle handsfree unit, the In Car profile is chosen.

For more information on automatic activation of profiles. See “Accessories”

on page 90.

There are six pre-programmed profiles:

•

Normal

•

Meeting

•

In car

•

Outdoors

•

Prt Handsfree

•

Home

Your phone is always set to one of the six profiles. When you buy your phone,

it is set to the Normal profile. You cannot create more profiles, but you can

change the name of a profile, change the settings included in a profile or add

an accessory to a certain profile.

Note!

You cannot change the name of the Normal profile and you cannot add

an accessory to the Normal profile.

For information on how to add an accessory to a profile, see “Adding

Accessories to a Profile” on page 96.

Tip!

To find out which profile you are using, slide the volume key upwards or

downwards in standby mode.

The Profiles

Summary of Contents for T28z

































































































































Search results

Summary of Contents for T28z

Reviews:

Related manuals for T28z

Brands by name

Popular brands

Ericsson T28z, User Manual

Search results

Summary of Contents for T28z

Reviews:

Related manuals for T28z

Brands by name

Popular brands