66
Handling More than One Call Simultaneously
If the Call Waiting service is on, you hear a tone in the earpiece if you receive
a second call. The number or name of the caller is normally shown at the top
of the display together with a list of the alternatives Answer, Busy and
Release&answer. If the incoming call is a restricted number, the display
shows
Private
. If the incoming call is a number without any CLI service,
Unknown
is shown.
You can do one of the following:
Put the current call on hold and answer the waiting call
•
Press
Y E S
to answer the waiting call.
The current call is now put on hold.
Your held call is marked in gray in the display and the active call is marked
in black.
Continue the current call and reject the waiting call
•
Select
Busy
.
The waiting call is rejected. If the caller’s network supports it, the caller
hears a busy signal.
Note!
If Forward When Busy is on, the waiting call is forwarded to the
number you have specified.
End the current call and answer the waiting call
•
Select
Release&Answer
.
When you have one active call and one call on hold, you can do one of the
following:
Switch between the two calls
•
Press
Y E S
.
End the active call and return to the call on hold
1.
Press
N O
. The question
Retrieve call?
appears.
2.
Press
Y E S
.
If you press
N O
, also the call on hold will be ended.
End both calls
•
Scroll to
Call Handling
,
Y E S
,
Release all
,
Y E S
.
Receiving a Second Call
One Active Call and One Call On Hold
