Ericsson T28z User Manual Download Page 8

Page: 8 / 128

Preparing Your Phone for Use

Charging the Battery

Note!

The electrical plug may look different depending on the electrical outlet

in your country. Do not connect it to any other item than your Ericsson Travel

Charger CTR-10. It must not be disconnected from the charger when plugged

into the electrical outlet.

To indicate charging:

•

the indicator on the top of the phone shows a steady red light (or green,

if the phone is switched on)

•

the message

Charging only

is shown in the display

•

the battery meter in the display pulses continuously

Note!

If you charge a new battery that is empty, or a battery that has not been

used for a long time, it may take a while until you get an indication of

charging in the display.

An Ericsson-approved battery is indicated by

Ericsson Optimized charging

each

time you start charging the battery when the phone is switched on. For the best

charging, talk and standby times in the long run, we recommend that you use

only Ericsson-approved batteries with your phone.

Batteries that are not Ericsson-approved are charged slowly for safety reasons.

These are indicated by

Charging alien battery

each time you start charging the

battery when the phone is switched on.

Tip!

You can use the phone while the battery is being charged. However, this

lengthens the charging time.

Connect the charger to the phone
as shown. The flash symbol on the
plug must face upwards.

Make sure that the battery is
attached to the phone.

Connect the charger to the
electrical outlet.

Summary of Contents for T28z

































































































































Search results

Summary of Contents for T28z

Reviews:

Related manuals for T28z

Brands by name

Popular brands

Ericsson T28z, User Manual

Search results

Summary of Contents for T28z

Reviews:

Related manuals for T28z

Brands by name

Popular brands