62
Receiving A Message
1.
Press the SHIFT/CLR/MONITOR button and then
use the SELECT buttons
<
or
>
to select a
Direct Mode System. The SYStem display will
indicated the current System selected.
2.
Use the SELect buttons
<
or
>
to select the
desired Channel. The radio is now ready to receive
message.
3.
Press the SHIFT/CLR/MONITOR button twice
(“double click”) and hold to disable squelch and
monitor the channel. Adjust the VOLUME control to
the desired audio level.
Pressing the SHIFT/CLR/MONITOR twice (“double
click”) to monitor the channel may affect Busy Tone
signalling if programmed for the select channel.
NOTE
4.
When a message is received (and the correct Busy
Tone signal is decoded, if programmed and enabled)
the receiver will unsquelch and the message will be
heard.
Sending A Message
1.
Turn the radio on and set the desired System and
Channel as described in the previous section.
