30
1.
Press and hold the SHIFT/CLR/MONITOR button.
2.
Use the SELECT
<
or
>
buttons to adjust
the squelch. Pressing the SELECT
<
will open
the squelch and pressing the SELECT
>
will
close the squelch.
The radio must be on a Conventional System or an
EDACS working Channel (i.e. receiving a voice call)
to adjust the squelch. It is recommended to adjust
squelch from a Conventional System.
NOTE
SENDING A SPECIAL CALL
1.
Press the
S
key to put the radio into Special Call
mode and provide access to a pre-programmed
special call alpha-numeric list. Each selection from
the list is pre-programmed with either an individual
number or an interconnect number. If programmed,
the special call alpha-numeric will be displayed. The
PHONE and
PP
status flags will also be illuminated
while in the Special Call mode.
2.
Press the SELECT
<
or
>
buttons to
increment or decrement through the special call list.
