54
2.
Enter the telephone number to be called. The last
digit entered will always be displayed in the far right
hand side of the display. Any previously entered
digits will scroll left. Only seven digits will be visible at
a time with the leading digit scrolling off the display
upon each new key entry. To backspace and clear a
digit, press the
s
key.
To recall the last interconnect number entered
manually from the key pad, press the
r
key.
NOTE
3.
Complete the telephone entry by pressing the
*
key. The
*
key indicates the digits are for an
inter-connect call. This will not be displayed but a
tone will sound.
4.
Press and release the PTT bar to initiate the call.
The radio displays WAIT and performs the
necessary signalling required to obtain a working
channel. When the signalling is successfully
completed the BUSY flag lights and the proper
DTMF tones will be sent and heard at the speaker.
The radio is out of range or the radio is inoperative
when the signalling is unsuccessful, the NO SRVC
indicator is illuminated and a sequence of five beeps
are heard at the speaker. Any subsequent attempt to
initiate a call within the next 20 seconds will be
ignored. The radio can be cleared from this mode by
double clicking the SHIFT/CLR/MONITOR button.
