34
selection. The PHONE and
PP
status flags will also
be illuminated while in the Special Call Mode.
2.
Enter the telephone number to be called. The last
digit entered will always be displayed in the far right
hand side of the display. Any previously entered
digits will scroll left. Only the last seven digits will be
visible at a time with the leading digit scrolling off the
display upon each new key entry. To backspace and
clear a digit, press the
s
key.
To recall the last interconnect number entered
manually from the keypad, press the
r
key.
NOTE
3.
Complete the telephone entry by pressing the
*
key. The
*
key indicates the digits are for an
interconnect call. This will not be displayed but a
tone will sound.
4.
Press and release the PTT bar to initiate the call.
The radio performs the necessary signaling required
to obtain a working channel. When the signaling is
successfully completed the BUSY flag lights and the
proper DTMF tones will be sent and heard at the
speaker. If the interconnect signaling is
unsuccessful, the radio will remain in the Special Call
Mode and sound the appropriate alert tone(s).
5.
When someone answers, press the PTT bar and
speak directly into the microphone. Release the
