Ericsson LBI-39224, Operation Manual

Page: 134 / 330

LBI-39224
3-104
Caller ID
This feature allows Caller ID on inbound interconnect calls. This is
done by assigning a "LID" to each telephone line. The NIM will now
track phone calls by searching the channels for the active phone line to
pick up radio keys/unkeys. This feature is presently not supported in
the Site Controller or GETC interface to accept caller based CTIS
drops. It also requires Jessica software and configuration changes to
assign IDs to phone lines. When this feature is enabled the caller ID is
sent to the site instead of 16383 system ID.
Multiple Jessica PBX Gateways
Use this option when an EDACS system that is "StarGated" has more
than one Jessica connected at multiple IMCs. This option will cause
caller based drops to be sent to the site, and when this feature is enabled
the caller ID is sent to the site instead of the 16383 system ID.
3.11 CONSOLE CONFIGURATION
Console configuration consists of CIM channel configuration, setting
up console user profiles, C3 Maestro console hardware configuration,
establishing privilege lists, C3 Modular/Desktop console configuration,
and viewing patch/simulselects. Each CEC/IMC can support up to 32
consoles. From the CEC/IMC Manager menu bar select
Configure System / Console Configuration to display the
Console Configuration
menu, shown in Figure 24. CIM channel
configuration is done from CEC/IMC Configuration as described in
the following section (Section 3.11.1).