manualshive.com logo in svg

Ericsson LBI-39224, Operation Manual, Page: 311 / 330

Share
Download
Ericsson LBI-39224 Operation Manual Download Page 311

LBI-39224

E-7

The information saved was successfully saved to the CEC/IMC
Manager hard disk.

The T1/E1 database was successfully downloaded (sent) from the
CEC/IMC Manager to the CEC/IMC MOM Controller Board.

Configuration data was successfully sent from the CEC/IMC Manager
and to the CEC/IMC MOM Controller Board.  Any audio configuration
changes will be sent to the appropriate interface module Controller
Board.  Any Bus/Slot configuration data will be compared to the
current configuration at the CEC/IMC Manager; if different, this data is
sent to the MOM Controller Board and when the MOM Controller
Board receives this new data an additional, different acknowledgment
message will be sent to the CEC/IMC Manager.  The Node ID
displayed is the CEC/IMC "switch assignment number" corresponding
to the local CEC/IMC, the Site number displayed will be the
corresponding "site assignment number" of the interface module.

Summary of Contents for LBI-39224











































































































































































































































































































































Reviews:

No comments