Trouble shooting
74 (87)
EN/LZT1083982 R4
2000-12-07
9
Click Close in the "Local Area Connection Status" dialog box and close the Network
and Dial-up Connections windows.
8.2
Reset the modem to factory default configuration
Failure to access your HM220d ADSL modem may occur if wrongly configured or
simply by forgetting the preconfigured IP address. You may end up in a situation where
restoring all of the original default is the only solution.
The following procedure will reset ALL of the modem's configurable values back to their
original defaults, including the IP address.
1
Unplug the power supply cable from the POWER connector on the back of the
modem.
2
Press the
PipeLock
button on the top of the modem and hold it down.
3
Reconnect the power supply cable and keep the
PipeLock
button pressed for at least
5 seconds before releasing it.
4
The modem will reboot and finally it will come back online with the original default
settings.
5
Reconfigure the modem according to the data supplied by your ISP/service provider.
6
Save your new configuration and reboot the modem.