Configuring the modem
54 (87)
EN/LZT1083982 R4
2000-12-07
Note:
This will take a while, but just wait until the "Status
message" appears.
If anything is incorrect you will be notified by the following status message: "The
parameters could not be altered according to your changes. Check the settings and consult
the documentation for help".
In that case, use the
Back
button to return to previous pages and make the necessary
changes.
When your settings have been accepted the following status message is shown (picture on
next page): "The parameters have been set. Press 'Reboot' to reboot the modem".
Status message
Figur 52: Configuration wizard - Status message
•
Click the
Reboot
button.
The wizard will now close and the modem is rebooting. This will take approximately one
minute.
When the Power, Ethernet or USB (depending on which connection is used), and ADSL
LEDs have turned solid yellow, the modem is ready for operation.