Installation using USB (for Windows 98 PCs)
EN/LZT1083982 R4
15 (87)
2000-12-07
3.2
Connecting equipment
To connect your HM220d ADSL modem via the USB interface, follow these steps:
1
Connect one end of the Telephone/ADSL cable to the modem's ADSL port and the
other end to the ADSL service port (wall jack or splitter/filter).
2
Connect the square plug of the USB cable to the USB port on the back of the modem
and connect the rectangular plug of the cable to the USB port on the back of your PC.
3
Connect the Power cable to the POWER connector on the back of the modem. Plug
the power supply adapter into a power source.
Figur 5: Connect via USB interface
4
Once the cables are connected, the PC will automatically search for the correct USB
driver, specific to your operating system.
Note:
The USB drivers are located on the CD-ROM disk that is
provided with the modem package. Insert the disk in your
PC's CD-ROM drive.
Follow the instructions in the next section to install the USB drivers.