If you scroll too far, you can go back by using
▼
(Down).
To select the
last
Special Function,
press
M
and then
▼
. You can then se-
lect another Special Function, by scroll-
ing backward with
▼
.
Using a Combination of the Two Methods
Enter the number of a Special Function, for example
11
,
and then scroll forward or backward using
▲
or
▼
.
Leaving a Special Function
A Special Function is left automatically after 10
seconds, and the display returns to normal. Within
these 10 seconds you can press
▲
or
▼
to move
on to another Special Function, or
C
(CLEAR) to
leave the Special Functions.
A Special Function will be left automatically if
somebody calls you. Press
Send
to answer.
Changing a Setting
You can change the setting of certain Special Functions.
For example, with Special Function No.
0. Ringing Signal
Volume
, you can set the volume of the ringing signal in four
steps, or turn the ringing signal OFF.
To change the setting, proceed as follows:
Press
any
numeric key, or the
*
(Star) or
#
(Hash) key (repeatedly) until the desired setting
appears in the display.
The
Ringing Signal Volume
function has five settings. If you
press a numeric key a fifth time, the initial setting reappears.
Storing a New Setting
Pressing
S
(STORE),
▲
or
▼
will store the new
setting.
Press
S
if you wish to store the setting and then
leave
the Special Functions.
Press
▲
(Up) or
▼
(Down) if you wish to store the
setting and then
go on
to another Special
Function.
Press
▲
once again to move on to the next
Special Function, or
▼
to move back to the
preceding Special Function.
If you do not press
S
,
▲
or
▼
within 10 seconds,
you will leave the Special Functions automatically.
The new setting will, however,
not
be stored.
If you wish to leave the Special Functions
without
storing anything, press
C
(CLEAR) within these 10
seconds.
Special Functions
31
