Not
for
Commercial
Use
Ericsson
Mobile
Communications
AB
Making and Receiving Calls
Making a Call
1. Enter the area code and phone number.
The phone number appears in the display. If
the number is longer than 10 digits, the begin-
ning of the number is shown as an arrow (see
Figure 10).
To erase a digit, press
CLR
. To erase the en-
tire phone number, press and hold down
CLR
for a couple of seconds.
2. Press
YES
to make the call. The display shows
Calling, followed by Connecting. The phone
icon appears.
If the number is busy, you hear a busy tone
and the display shows Busy.
Holding the Phone
Put the earpiece to your ear for the best speech
and reception quality (see Figure 11).
Ending a Call
●
Press
NO
to end the call.
Making an
International Call
1. Press and hold the zero key until the interna-
sign is displayed.
2. Enter the country code, area code (without
any leading zero) and the phone number.
3. Press
YES
to make the call.
Making an
Emergency Call
●
Enter
112
(the international emergency num-
ber) and press
YES.
The display shows Emer-
gency.
The
112
emergency number can be used in any
country with or without a SIM Card, if a GSM
network is within range.
Note!
Some GSM networks do not support the inter-
national emergency number.
Retry Function
If the call connection fails, the display shows
Retry? Press
YES
to redial the number, other-
wise
NO
.
Receiving a Call
When you receive a call, the phone rings and
the indicator light on the top of the phone blinks
green rapidly. The display shows Answer?
Answering a Call
●
Press
YES
to answer the call
●
When the call is finished, press
NO
.
Figure 10. Number with more than 10 digits
Figure 11. Holding your phone
7
