Not
for
Commercial
Use
Ericsson
Mobile
Communications
AB
Rejecting a Call
●
Press
NO
or a volume key twice when the
phone rings.
The display now looks like this:
%USY7ONE
If the caller’s network supports it, the caller
hears a busy tone.
If you have been unable to answer, or you have
rejected a call, the number of the unanswered
call is shown in the display until you press
CLR
(this depends on your subscription).
Putting a Call on
Hold
If you are engaged in a call, you can put it on
hold by pressing
YES
. This mutes the micro-
phone so that you can have a private conversion
without the person at the other end hearing. To
put the call off hold, press
YES
again.
Calling Line
Identification (CLI)
The Calling Line Identification service shows
the caller’s phone number when you receive a
call (you have to order this service). If the
caller’s name is stored in your phone book, the
name is displayed instead of the number.
Showing Your
Phone Number
If you subscribe to withhold your number when
calling, you can show the number on a particu-
lar call.
1. Enter the number you wish to call.
2. Press
.
The display shows Send Id?
3. Press
YES
to make the call.
Hiding Your
Phone Number
If you subscribe to show your number when
calling, you can hide your number on a particu-
lar call.
1. Enter the number you wish to call.
2 Press
twice.
The display shows Hide Id?
3. Press
YES
to make the call.
Handling Two Calls
Your phone can handle two calls simultane-
ously. This allows you to hold one call and
make or receive another. You can switch be-
tween the two calls.
To receive a second call, you must activate the
Call Wait function (see the chapter on Personal-
izing Your Phone on page 12).
Receiving a Second Call
While a Call Is in Progress
When you receive a second call, you will hear a
tone in the ear piece and the display shows Call
Wait.
●
Press
YES
answer the second call. The current
call is put on hold.
The display now looks like this.
2N +OLD
●
To reject the second call, press zero followed
by
YES
.
Switching Between
Two Calls
●
Press
YES
to switch between the two calls.
Ending the Current Call and
Return to the Held Call
1. Press
NO
to end the current call.
The display shows Retrieve? and you hear
two beeps.
2. Press
YES
within three seconds to return to the
held call.
If you do not press
YES
within three seconds,
the held call is ended automatically.
8
